Ultrasound Hardware · Imaging AI

把声波,做成
可计算的影像。

Acoustic imaging,
made computable.

超宜研发智能超声硬件与医学影像 AI 算法:从探头前端、成像链路到设备端推理,服务医疗机构、设备伙伴与科研场景。

Ultraneeds develops intelligent ultrasound hardware and medical imaging AI — from probe front-end and imaging pipeline to on-device inference — for hospitals, device partners, and research.

01   Company

一家把超声当仪器,也当计算问题来做的公司。

A company that treats ultrasound as both an instrument and a computation problem.

超宜智能科技(深圳)有限公司是一家专注于智能超声硬件与医学影像人工智能算法的科技企业。我们将声学前端、成像链路与深度学习放在同一套产品体系中研发,而不是把硬件与算法拆成互不相干的两套演示。

Ultraneeds Intelligent Technology (Shenzhen) Co., Ltd. is a technology company focused on intelligent ultrasound hardware and medical imaging AI. We develop the acoustic front-end, imaging pipeline, and deep learning stack as one product system — not as disconnected demos.

公司以超声物理与信号处理为根基,在探头设计、波束形成、图像重建与设备端推理上持续投入。算法覆盖图像质量增强、标准切面识别、自动测量与辅助标注,强调可验证、可部署、可在设备端运行。

Our work is grounded in ultrasound physics and signal processing, with ongoing investment in probe design, beamforming, image reconstruction, and on-device inference. Algorithms cover image-quality enhancement, standard-plane recognition, automated measurements, and assisted annotation — built to be verifiable and deployable at the edge.

我们理解医疗场景对稳定性、数据安全与监管合规的要求。本网站用于说明公司主体、技术方向与联系方式,便于合作机构与平台审核识别;具体产品的适用范围、禁忌与注册信息以相关监管批准文件为准。

We take reliability, data security, and regulatory compliance as operating constraints. This website identifies the legal entity, technical scope, and official contacts for partners and platform review. Indications, contraindications, and registration status of any product are governed solely by applicable regulatory approvals.

02   Products

两条产品线:采集硬件,与可上设备的算法。

Two product lines: acquisition hardware, and algorithms that run on the device.

智能超声硬件

Intelligent ultrasound hardware

面向临床与科研采集场景,研发超声探头与成像硬件模块,覆盖线阵、凸阵与相控阵等常见阵型,强调前端噪声控制、通道一致性与长期稳定工作。

Probes and imaging hardware modules for clinical and research acquisition. Common array types include linear, convex, and phased arrays, with emphasis on front-end noise control, channel consistency, and long-term stability.

医学影像 AI 算法

Medical imaging AI

提供可集成的影像算法能力:斑点抑制与对比度增强、标准切面识别、自动生物测量与辅助标注。优先设备端轻量推理,降低影像数据出域风险。

Integrable imaging algorithms: speckle suppression and contrast enhancement, standard-plane recognition, automated biometric measurement, and assisted annotation. We prioritize on-device inference to reduce unnecessary export of imaging data.

成像与边缘计算模块

Imaging and edge compute module

将波束形成、图像重建与 AI 推理放在靠近探头的计算单元中,缩短链路延迟,便于嵌入整机或手持系统。

Beamforming, reconstruction, and AI inference sit in a compute unit close to the probe, cutting pipeline latency and simplifying integration into cart-based or handheld systems.

合作与集成

Partnership and integration

向设备厂商与医疗机构提供硬件模块、算法授权与工程集成支持,包括接口适配、模型部署与质量验证协作。

We work with device manufacturers and healthcare institutions on hardware modules, algorithm licensing, and engineering integration — including interface adaptation, model deployment, and joint quality validation.

声明:本站所述技术能力用于说明研发方向与产品形态,不构成诊疗建议,亦不表示某一具体型号已获得某国医疗器械注册或认证。任何临床使用须遵守当地法规与产品说明书。

Disclaimer: Technical descriptions on this site explain R&D direction and product form. They are not medical advice and do not represent that a specific model has obtained a given country’s medical-device registration. Clinical use must follow local regulations and the product’s instructions for use.

03   Technology

声学、信号、嵌入式与深度学习在同一条链路上。

Acoustics, signal processing, embedded systems, and deep learning on one chain.

Acoustics
探头阵元、匹配层与声透镜设计,服务带宽、穿透与近场控制。
Transducer elements, matching layers, and acoustic lenses, serving bandwidth, penetration, and near-field control.
Beamform
数字波束形成与图像重建,处理延迟、变迹与伪影抑制。
Digital beamforming and reconstruction, addressing delay, apodization, and artifact suppression.
On-device AI
面向超声帧率与功耗约束的模型压缩与设备端推理。
Model compression and on-device inference under ultrasound frame-rate and power constraints.
Quality
以可重复实验、数据留痕与版本管理支撑算法与硬件迭代。
Repeatable experiments, data provenance, and version control underpin hardware and algorithm iteration.
04   Contact

公开可核验的公司联系方式。

Public, verifiable company contacts.

以下信息用于商务联系、用户支持,以及苹果开发者组织认证等平台核验。请使用公司域名邮箱沟通。

Use the contacts below for business, product support, and platform verification such as Apple Developer organization enrollment. Please write from/to the company domain email.

法定名称
Legal name
超宜智能科技(深圳)有限公司
Ultraneeds Intelligent Technology (Shenzhen) Co., Ltd.
地址
Address
中国广东省深圳市南山区 Nanshan District, Shenzhen, Guangdong, China
电话
Phone
+86 755 0000 0000
时间
Hours
工作日 09:00–18:00(北京时间) Weekdays 09:00–18:00 (Beijing Time)